Open sidebar

Complete equipment - TECHNONICOL

1. PLANTER profile – HDPE profiles (profiles made of polyethylene with high density) are two-meter laths produced from painted zinked metal. They guarantee protection of the upper side of a profiled membrane. A profile is fixed on the top by means of steel dowels, which are inserted into special holes on the profile. The size of PLANTER-profile is 82 mm x 2.0 m. One package contains 20 profiles.

 

2. PLANTER-assembly A set of a washer and a steel dowel is used for fixation of profiled membranes on a vertical surface in waterproofing of foundations. A special form of the washer gives an opportunity to distribute load on a broad surface and to avoid concentration of weight of a membrane only on the dowel.

 

3. Technoelast BARRIER (BO)-MINI is a roller which is 20 or 25 cm broad; it consists of a special mixture of a bitumen-polymer astringent covering a thick polymer film. On the other side the band is covered with a protective film, which can be easily taken away.

Rollers Technoelast BARRIER (BO)-MINI do not have a basis just like rolled Technoelast BARRIER (BO). That’s why the materials are characterized by high elasticity and flexibility, and that guarantees the highest quality during execution of works on protection of tubing from corrosion, seam sealing and sealing of joints in structural units.

It can be laid on an inflammable basis, without supplementary equipment, in closed limited space.

Technoelast BARRIER (BO)-MINI can be used in all climatic zones (according to Construction Norms and Specifications 23-01-99*).

Method of application

In order to provide high-quality gluing the temperature of the basis and material shouldn’t be lower than 5°С. At lower temperatures it is necessary to warm up the basis and the bottom of the material. The siliconized film is taken away from the bottom of the material, and the material is glued to the basis. It is not recommended to use it on hot surfaces, if their operating temperature is higher than 45–50°С. It is used to connect overcloaks of pieces of a profiled membrane PLANTER


4. Self-adhesive proofing band NIKOBEND.

NICOBEND is a universal self-adhesive proofing band. It consists of a colored reinforced aluminium coating, covering a waterproofing self-adhesive layer. It is easily taken away.

The material is simple and convenient to operate and at the same time it creates an ideal connection with concrete, plaster, metal, bitumen, stone, wood, plastic and other surfaces. A band - sealing material is used for sealing of seams and joints, repair of splits, waterproofing and protection from corrosion.

NIKOBEND can be used in all climatic zones (according to Construction Norms and Specifications 23-01-99*).

Method of application

The band is glued on a prepared surface. In order to provide firm fixation it is necessary to press the band with hands. In order to get good gluing the temperature of the basis and material shouldn’t be lower than 5°С. At lower temperatures it is necessary to warm up the basis and the bottom of material. It is not recommended to use band NIKOBEND on hot surfaces, if their operating temperature is higher than 45–50°С. It is used to connect overcloaks of pieces of profiled membranePLANTER.


 

5. Fittings TECHNONICOL №01.

Fittings TECHNONICOL №01 are produced from polyethylene of low pressure. Fittings consist of a thorn with jags used for fixation in a material and a flat plate with a gluing layer on it. The layer is protected by a film that can be easily taken away.

Fittings TECHNONICOL №01 are used for fixation of heat-insulating plates made of extrusive foam polystyrene and profiled membranes PLANTER to different surfaces, including bitumen or bitumen-polymer waterproofing in the systems of insulation of foundations.

NOTIFICATION: We inform you that the site processes personal data and uses "cookies". We undertake to ensure the confidentiality of personal data received from you for the purposes specified in this Privacy Policy on personal data processing, as well as safety when processing them in accordance with the requirements of the Legislation of the Russian Federation. To confirm your consent to processing data on the above conditions, click "I agree"