Peculiarities
Technoelast EMP 5.5 is a roll roofing and waterproofing melting bitumen-polymeric water-resistant material. Technoelast EMP 5.5 is produced with the help of covering a polyester base on both sides with bitumen-polymeric astringent, consisting of bitumen, SBS (styrene-butadiene-styrene) polymeric modifier and mineral filling compound (talk, dolomite and others). Grit and polymeric film are used as a protective layer.
Use
It is used for arrangement of waterproofing of buildings and constructions, structural units, including a reinforced concrete slab on the traffic way of bridges.
Performance of the work
According to "Instructions on designing and installation of roofs made of bitumen-polymeric materials of “TechnoNICOL” Roofing Company”, "Instructions on designing and installation of waterproofing and gas-insulation of подземных частей of buildings and constructions with the help of «Technoelast ALFA» " and “Guidelines on waterproofing of bridges with the help of roll melting materials «Technoelast EMP» and «Technoelast Thermo EMP»", it can be used in all climatic zones in accordance with Construction Norms and Specifications 23-01.
Specifications:
Property | Technoelast EMP 5.5 | |
Water absorption during 24 h, % by weight, no more than | 1 | |
Weight of astringent on the melting side, kg/m2,no less than | 2 | |
Weight, kg/m2, no less than | 5.5 | |
Breaking force at stretching in longitudinal /transverse direction, N, no less than on | polyether | 600/400 |
Temperature of flexibility on a timber with R=25mm, оС, not higher than | -25 | |
Temperature of flexibility on a timber with R=10 mm, оС, not higher than | -25 | |
Brittle temperature of astringent , оС, not higher than | -35 | |
Impermeability to water at pressure no less than 0,2 МPа, during 2 hours | absolute | |
Length / width, m | 10х1 | |
Type of covering | the top | sand |
the bottom | film |