Open sidebar

NICOBAND™ - TECHNONICOL

Application areas

Sealing and waterproofing.

Description of material

NIKOBAND is a universal self-adhesive sealing band. It is produced by placing a color reinforced aluminum covering on a waterproof self-adhesive bitumen layer. The protective film on the adhesive bitumen layer is easy to remove. The material is easy and convenient to use, and it bonds ideally to concrete, plaster, metal, bitumen, stone, wood and other surfaces. The sealing band is designed for sealing seams and joints, repairing cracks, waterproofing, and corrosion protection. NIKOBAND can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Method of application

The surface must be clean, dry, and free from rust and dust. For a better and more durable bond a primed base is recommended. The surface and material temperature must be at least +5°C. At lower temperatures it is necessary to heat the adhesive side of the material and the base. It is not recommended to apply a strip to hot vertical surfaces (with a temperature above +85°C).

Storage

Store in a place protected from atmospheric precipitation and direct sunlight.

Basic dimensions

Width, cm 5 7,5 10 15 20 30
Length 3 m yes yes yes yes no no
Length 10 m no yes yes yes yes yes
  • Fireless laying – where the use of open flame is prohibited. Laying on a flammable base is possible.
  • Laying without additional equipment.
  • Laying in confined and limited space.
  • Assembling without special professional skills.

Self-adhesive sealing band «NICOBAND™» is used in repairing and construction of houses and buildings. Main scopes of application are as follows:

  • Seams and joints sealing in constructions of different materials (concrete, metal, brick, wood, plastic, etc.).
  • Making abutting joints on flat and sloping roofs.
  • Repairing metal welted roofing.
  • Repairing drain systems (metal and plastic).
  • Sealing vapour insulating films.
  • Sealing field welds when putting a drainage layer of profiled membranes «Planter».
  • Water insulation of metal pipes for cold water supply.
  • Joints sealing in constructions made of cellular polycarbonate (hoods, sheds, greenhouses, etc.).
  • Making capillary cutoffs during stone and wood works.
  • Water insulation for wooden objects in concrete and stone constructions (window and door units).
  • Ventilation systems sealing (air chutes, flexible air pipes).
  • Vapour- and water insulation for field welds when making heat insulation of polyethylene foam.
  • Sealing metal and plastic bodies of vehicles. Boats repairing.
  • Noise- and vibration insulation for metal sanitary equipment (sinks, baths), and metal weatherings.

     

NICOBAND™ is made by applying adhesive bitumen-polymer binding substance on one side of a foiled UV-proof film. The binding substance consists of bitumen, butadiene-sterol thermoplastic elastomer or its modifications and a filler. An anti-adhesive polymer film is used as a protecting layer on the gluing side.

Due to the instructions on the individual package of the material, it can be used in all the climatic regions in accordance with СНиП 23-01 (Construction Rules and Regulations).


TechnoNICOL Corporation offers modern building materials that conform to European and Russian Quality Standards: roll roofing materials, water sealing mastics, bitumen, Stone wool, materials for facade insulation.

NOTIFICATION: We inform you that the site processes personal data and uses "cookies". We undertake to ensure the confidentiality of personal data received from you for the purposes specified in this Privacy Policy on personal data processing, as well as safety when processing them in accordance with the requirements of the Legislation of the Russian Federation. To confirm your consent to processing data on the above conditions, click "I agree"