Maximal reliability of roof waterproofing.
Description of material
Technoelast TITAN is a material with unique physical and mechanical properties, excellent flexibility at negative temperatures and high heat endurance, allowing it to be used as waterproofing on roofs in zones with high temperature fluctuations. Wide range of dressing compound colors for various designs. Technoelast TITAN TOP is used as the top layer of multilayer roof cladding. Coarse-grained basalt dressing compound provides reliable protection of the material against sunlight.
Technoelast TITAN ВАSЕ is used for installation of the bottom layers of multilayer roof cladding and waterproofing of engineering structures.
Technoelast TITAN SOLO is used for installation of one-layer roof cladding and waterproofing of engineering structures. Technoelast TITAN can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
Depending on the grade, the material is welded on a prepared surface using a gas burner or is installed mechanically.
Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Materials Manufactured by the TechnoNICOL Corporation.
Store vertically, in a place protected from direct sunlight.
Service life — 35 years
Waterproofing warranty — 10 years
Types of material
|Property||TITAN BASE||TITAN TOP||TITAN SOLO|
|Thickness, mm (±0.1 mm)||4,0||4,5||5,0|
|Mass of 1 m2, kg, (±0.25 kg)||4,5||5,5||5,8|
|Longitudinal/transverse breaking load, N, not less than||polyester||600/400||600/400||1000/800|
|Bend point on R=25 mm and R=10 mm beam, °C, no more than||-35||-35||-35|
|Heat endurance, °С, not less than||140||140||140|
|Protective covering type||on the top||film without logo||basalt||basalt|
|on the bottom||film with logo||film with logo||film with logo|
|Length / width, m||10х1||10х1||8х1|