Application areas
Waterproofing of roofs, basements and other engineering structures. Recommended for use in regions where the material is used at elevated temperatures.
Description of material
Technoelast THERMO is a waterproofing sheet produced by two-sided placing of a polymer-bitumen binder on a polyester or fiberglass base. Actually, the material is similar to Technoelast and is multifunctional. Because of special modifiers (APP-modifi ers), Technoelast THERMO retains its operating properties even at very high temperatures (up to +1300C).
Technoelast THERMO K is designed to be used as the top layer of roof cladding. Coarse-grained dressing compound protects the material against sunlight. Technoelast THERMO P is used for installation of the bottom layer of roof cladding and for waterproofing of engineering structures (basements, etc.). Technoelast THERMO can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is welded on a prepared surface using a gas burner or special-purpose equipment.
Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Materials Manufactured by the TechnoNICOL Corporation.
Storage
Store vertically, in a place protected from direct sunlight.
Waterproofing warranty — 10 years
Service life — 25-30 years
Types of material
EPP
HPP
EKP
TKP
Specifications:
| Property | EPP | HPP | EKP | TKP | |
| Thickness, mm (±0.1 mm) | 4,0 | 3,0 | 4,2 | 4,2 | |
| Mass of 1 m2, kg, (±0.25 kg) | 4,4 | 3,4 | 5,1 | 5,1 | |
| Breaking load when tensioning, N, not less than | polyester | 600/400 | - | 600/400 | - |
| Breaking load* when tensioning, N, not less than | fiberglass | - | - | - | 800/900 |
| fiberglass mat | - | 294/- | - | - | |
| Bend point on R=25 mm and R=10 mm beam, °C, no more than | -15 | -15 | -15 | -15 | |
| Heat endurance, °С, not less than | 130 | 130 | 130 | 130 | |
| Protective covering type | on the top | film without logo | film without logo | slate | slate |
| on welded-on side | film with logo | film with logo | film with logo | film with logo | |
| Length / width, m | 10х1 | 10х1 | 10х1 | 10х1 |