Application areas
Self-adhesive waterproofing of roofs.
Description of material
Technoelast S has high physical and mechanical parameters for premium class materials. The basic distinctive feature of the material is an adhesive polymer-bitumen layer applied to the bottom surface. The material is easy to work with: just remove the protective film, place the material on the prepared base, and roll them together. Technoelast S EKS, coarse-grained dressing compound on the top side of the sheet, protects the polymer-bitumen layer against sunlight exposure. Used for installation of one-layer roof cladding. Technoelast S EMS is recommended for use as the bottom layer of roof cladding when laid on a combustible base (wooden base, extruded polystyrene foam).
Technoelast S can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
For high quality adhesion, the base and material temperature should not be less than +5°С. At lower temperatures, the base and the bottom surface of the material should be warmed up. The siliconized film should be removed from the bottom of the material, and the material is glued to the base.
Material application: according to the Manual for Designing and Installation of Roofs Made of Technoelast S Self-Adhesive Material.
Storage
Store vertically, in a place protected from direct sunlight at temperatures between –15°C and + 30°C.
Waterproofing warranty — 10 years
Service life — 25-30 years
Types of material
Technoelast S EMS
Technoelast S EKS
Specifications:
Property | Technoelast S EMS | Technoelast S EKS | |
Thickness, mm (±0.1 mm) | 3,2 | 4,2 | |
Mass of 1 m2, kg, (±0.25 kg) | 3,4 | 5,0 | |
Longitudinal/transverse breaking load, N, not less than | polyester | 500/300 | 600/400 |
Bend point on R=25 mm and R=10 mm beam, °C, no more than | -25 | -25 | |
Heat endurance, °С, not less than | 100 | 100 | |
Cohesive strength, MPa (kgf/cm2), not less than | with concrete | 0,2 (2,0) | 0,2 (2,0) |
with metal | 0,2 (2,0) | 0,2 (2,0) | |
Protective covering type | on the top | sand | slate |
on the bottom | antiadhesion film | antiadhesion film | |
Length / width, m | 10х1 | 10х1 |