Roof waterproofing with fireless installation on mastic.
Description of material
Technoelast PRIME is a roofing polymer-bitumen material for installation of the bottom and top layers designed for installation of two-layer roof claddings with mastic adhesion. This technology combines the advantages of roofs made of roll-fed materials and seamless solid mastic roofs.
Technoelast PRIME EKM is a material with coarse-grained dressing compound on the face and fine-grained dressing compound on the bottom side of the sheet used for the installation of the top layer of roof cladding.
Technoelast PRIME EMM is a material with fi ne-grained dressing compound on both sides of the sheet used for the installation of the bottom layer of roof cladding.
Method of application
Materials in Technoelast PRIME series are not designed for welding. Adhesive TECHNONICOL mastic #22 (Vishera) is used to fix the material.
Material application: according to the Manual for Designing and Installation of Roofs Made of Technoelast PRIME and Technoelast SOLO Materials Manufactured by the TechnoNICOL Company and Laid on Cold Mastic.
Store vertically, in a place protected from direct sunlight.
Types of material
Technoelast PRIME EMM
Technoelast PRIME EKM
|Property||Technoelast PRIME EMM||Technoelast PRIME EKM|
|Thickness, mm (±0.1 mm)||3,0||4,0|
|Mass of 1 m2, kg, (±0.25 kg)||3,0||4,0|
|Longitudinal/transverse breaking load, N, not less than||polyester||600/600||600/600|
|Bend point on R=25 mm and R=10 mm beam, °C, no more than||-25||-25|
|Heat endurance, °С, not less than||100||100|
|Protective covering type||on the top||sand||slate|
|on the bottom||sand||sand|
|Length / width, m||10х1||10х1|