Open sidebar

Technoelast FLAME STOP

Application areas

Waterproofing of roofs with more stringent requirements for fire safety.

Description of material

Technoelast FLAME STOP is a material for arranging the top layer of roof cladding. Due to the unique polymer-bitumen mixture with special components (fire-retardants) , Technoelast FLAME STOP offers enhanced fire-fighting performance. According to Construction Codes and Regulations (SNiP) 21.01, the material has the following parameters: — flame spread group RP1 (does not spread fl ames); — inflammability group V2 (moderately infl ammable). Technoelast FLAME STOP can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Method of application

The material is welded on a prepared surface using a gas burner. Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Materials Manufactured by the TechnoNICOL Corporation.


Store vertically, in a place protected from direct sunlight.

Waterproofing warranty — 10 years

Service life — 25-30 years


Property Technoelast FLAME STOP
Thickness, mm (±0.1 mm) 4,2 
Mass of 1 m2, kg, (±0.25 kg) 5,2 
Longitudinal/transverse breaking load, N, not less than  polyester 600/400 
Bend point on R=25 mm and R=10 mm beam, °C, no more than -25 
Heat endurance, °С, not less than 100 
Fireproofing parameters RP1 and V2 
Protective covering type  on the top slate 
on welded-on side film with logo 
Length / width, m 10х1 

NOTIFICATION: We inform you that the site processes personal data and uses "cookies". We undertake to ensure the confidentiality of personal data received from you for the purposes specified in this Privacy Policy on personal data processing, as well as safety when processing them in accordance with the requirements of the Legislation of the Russian Federation. To confirm your consent to processing data on the above conditions, click "I agree"