Application areas
Waterproofing of multipurpose roofs with planting.
Description of material
Technoelast GREEN is specially designed for waterproofing of green roofs and underground engineering structures. Special additives to the polymer-bitumen binder make it resistant to damage caused by roots of plants and ensure reliable waterproofing.
Technoelast GREEN K is applied as the top layer of roof cladding. Coarse-grained dressing compound on the top side of the sheet protects of the polymer-bitumen layer against sunlight exposure.
Technoelast GREEN P is used for waterproofing of roofs and underground engineering structures. Chemical and mechanical protection from root sprouting in the form of a thick polymer film on the top.
Technoelast GREEN can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is welded on using a gas burner. Used as the top layer of waterproofing cladding.
Material application: according to the Manual for Designing and Installation of Multipurpose Roofs with Planting Using Technoelast GREEN Material with Increased Protection from Penetration of Plant Root Systems.
Storage
Store vertically, in a place protected from direct sunlight.
Waterproofing warranty — 10 years
Service life — 25-30 years
Types of material
Technoelast GREEN EPP
Technoelast GREEN EKP
Specifications:
| Property | Technoelast GREEN EPP | Technoelast GREEN EKP | |
| Thickness, mm (±0.1 mm) | 4,0 | 4,2 | |
| Mass of 1 m2, kg, (±0.25 kg) | 5,0 | 5,2 | |
| Longitudinal/transverse breaking load, N, not less than | polyester | 600/400 | 600/400 |
| Bend point on R=25 mm and R=10 mm beam, °C, no more than | -25 | -25 | |
| Heat endurance, °С, not less than | 100 | 100 | |
| Protective covering type | on the top | thick film | slate |
| on welded-on side | film with logo | film with logo | |
| Length / width, m | 10х1 | 10х1 |