Waterproofing of roofs. Repair of roof cladding. Vaporproofing.
Description of material
Linocrome is a waterproofing sheet produced by two-sided installation of bitumen binder on a dense rot-proof base. This material has been used for many years and is a successful solution for low-budget projects.
Linocrome K is applied as the top layer of roof cladding. Coarse-grained dressing compound on the face side protects the material against sunlight.
Linocrome P is applied as the vaporproofing bottom layer of roof cladding. A fi ne-grained dressing compound or a polymer film can be used as a protective layer.
Linocrome can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is welded on a prepared surface using a gas burner. Material application: according to the Manual for Designing and Installation of Roofs Made of Bitumen Materials Manufactured by the TechnoNICOL Company.
Store vertically, in a place protected from direct sunlight.
Many years of successful application
Service life — 7-10 years
Types of material
|Mass of 1 m2, kg, (±0.25 kg)||3,85||3,85||3,85||5,1||5,2||5,1|
|Longitudinal/transverse breaking load, N, not less than||polyester||343/-||-||-||343/-||-||-|
|Bend point on R=25 mm beam, °C, no more than||0||0||0||0||0||0|
|Heat endurance, °С, not less than||85||85||85||85||85||85|
|Protective covering type||on the top||film without logo||film without logo||film without logo||granulated material, slate||granulated material, slate||granulated material, slate|
|on welded-on side||film with logo||film with logo||film with logo||film with logo||film with logo||film with logo|
|Length / width, m||15х1||15х1||15х1||10х1||10х1||10х1|