Waterproofing of bridgeworks and other engineering structures.
Description of material
TECHNOELASTMOST B is a waterproofing sheet produced by two-sided installation of high-quality polymer-bitumen binder on a strong rot-proof polyester base. The unique binder formula provides for enhanced durability and wear resistance of TECHNOELASTMOST B. TECHNOELASTMOST B is designed for waterproofing of reinforced concrete slabs on the traffi c ways of bridgeworks, as well as waterproofi ng of other engineering structures. TECHNOELASTMOST can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is welded on a prepared surface using a gas burner or special-purpose equipment. Material application: according to the Manual for Waterproofi ng of Bridgeworks by Roll-Fed Welded-On TECHNOELASTMOST Materials and the Manual for Application of Welded-On Roll-Fed TECHNOELASTMOST and Technoelast Materials for Waterproofing of Structures.
Store vertically, in a place protected from direct sunlight.
|Thickness, mm (±0.1 mm)||5,0|
|Mass of 1 m2, kg, (±0.25 kg)||6,0|
|Longitudinal/transverse breaking load, N, not less than||polyester||600/600|
|Bend point on R=25 mm and R=10 mm beam, °C, no more than||-25|
|Heat endurance, °С, not less than||100|
|Static puncture resistance, N, not less than||-|
|Protective covering type||on the top||sand|
|on welded-on side||film with logo|
|Length / width, m||8х1|