EN UA
Hot Line: 8 800 200 05 65


Products

Technonicol butyl rubber sealant #45

Technonicol butyl rubber sealant #45

Application areas

Butyl rubber sealant is used to seal exterior surfaces, seams and joints of engineering structures of residential, public and industrial buildings and facilities. It comes in white and gray colors. This product is for professional use.

Description of material

The sealant is a homogeneous visco-elastic moving mass based on butyl rubber containing fi llers, target additives and organic solvent. After hardening TECHNONICOL butyl rubber sealant #45 is transformed into an elastic, water-air-tight mass that has high resistance to atmospheric influences (solar radiation, ozone, temperature extremes).

Method of application

Before applying TECHNONICOL butyl rubber sealant #45 it is necessary to make sure that it is carefully mixed. Apply to the prepared surface using a trowel at an ambient temperature between -20°C to +40°C. When applying at subzero temperatures the sealant should be kept at room temperature for at least a day before application. The sealant surface coverage depends on a type of performed work.

Storage

Store in a heated, dry place protected against sunlight at a temperature of between +5°C and +30°C. Guaranteed storage period—12 months.

Safety measures

Avoid contact with skin and eyes. Do not use inside living quarters. Do not use near an open flame.

Convenient and safe to use at the work site

High resistance to atmospheric pressures

Painted in all kinds of exterior paints



Basic physical and mechanical properties

PropertyColor: gray, white
Density of working composition, kg/m900-1100
Nominal strength when broken, MPa, not less than0,2
Adhesive strength to concrete, MPa, not less than0,2
Specific elongation when broken, %100
Mass fraction of dry residue, %Not less than 50
Drying time to "tack", min., not more than60
Temperature range of use, from -45 to +45 C