EN UA
Hot Line: 8 800 200 05 65


Products

Bitumen Road Emulsion TECHNONICOL (EBK)

Bitumen Road Emulsion TECHNONICOL (EBK)

Bitumen Road Emulsion TECHNONICOL (EBK) is homogeneous low-viscous liquid produced by means of dispersion of bitumen in water solution of emulsifying agent. Such emulsion produced by us belongs to oil-in-water bitumen emulsions. This very type of bitumen is widely used during production of road work of various kinds. Because of its relatively low viscosity the bitumen emulsion provides the most acceptable conditions for treating road construction materials.

Bitumen Road Emulsion TECHNONICOL (EBK) is produced using special equipment and emulsifying agents. It can be of two basic types: oil-in-water and inverted. This classification is based on the form of the composition. Bitumen Road Emulsion TECHNONICOL (EBK) provides an alternative method of storage, transportation and use of bitumen.

It is the safest and most ecological in comparison with traditional ways of use of bitumen, it doesn’t demand high energy consumption and can be used together with cold humid stone materials.

Use

  • It is used as a tack coat of the basis during road-building.
  • It is used for arrangement of layers of pavement by means of impregnation and surface treatment.
  • It is used for arrangement of thin uneven wearing layers.
  • It is used as a constituent of an emulsion-mineral mixture during patching.

Brands

Three brands of emulsion are produced depending on the stability during mixing with mineral materials: EBK-1, EBK-2, EBK-3.
EBK-1
EBK-2
EBK-3

Bitumen Road Emulsions TECHNONICOL (EBK) are transported in tanks, binder distributors, bitumen distributors and metal barrels. It should be stored in tanks and other cylindrical metal containers. Storage containers must be clean, without remains of emulsion, bitumen, fuel and lubrication materials and other acidic or alkaline materials.

It isn’t allowed to pour together emulsions with different compositions into one container. In order to protect bitumen emulsion from getting dirty and losing water, containers should be well closed.

Temperature of emulsion during storage shouldn’t be lower than 5 °. Depositories for emulsions bigger than 1 3 should be equipped with a device for transference. “TechnoNICOL” Corporation offers modern building materials corresponding to Russian and European quality standards, including roll roofing materials, bitumen, materials for sound insulation of flats and rooms, repair of a roof.



Types of material

    EBK-1

    EBK-2

    EBK-3


Basic physical and mechanical properties

PropertyEBK-1EBK-2EBK-3
Content of astringent with emulsifying agent, % by weight, within the limits50-70 50-60 55-60
Relative viscosity at (20,00,5) ,St, within the limits10-65 10-25 15-25
Stability during blending with mixtures of mineral materials: dense grain distribution Doesnt mix Doesnt mix Mixes
porous grain distributionDoesnt mix Mixes Mixes
Cohesion with mineral materials, point, no less than5 5 4
Remainder on sieve 014, % by weight, no less than0.25 0.25 0.25
Storage stability (remainder on the sieve with net 014), % by weight, no more than in 7 days0.3 0.3 0.3
in 30 days0.5 0.5 0.5
Stability during transportationEmulsions should not break up into water and astringent Emulsions should not break up into water and astringent Emulsions should not break up into water and astringent
Penetration of a needle, 0.1 mm, no less than at 25 Ѡ60 90 90
at 0 Ѡ20 28 28
Softening temperature around a circle and a sphere , , no less than47 43 43
Stretchability, cm, no less than at 25 Ѡ55 65 65
at 0 Ѡ3.5 4.0 4.0
Flexibility, %, no less than at 25Does not normalize Does not normalize Does not normalize