Application areas
Roof waterproofing for mechanical fastening.
Description of material
Technoelast FIX is a waterproofing sheet for the installation of roofi ng systems with mechanical fastening to the base (the material is used as the bottom layer of a two-layer system). Within a short period of time, this technology provides the roof cladding that can withstand large base deformations and operates as a "breathing" roof. The cross-reinforced foundation prevents deformation of Technoelast FIX, and sand on the bottom surface prevents the material from sticking to the base.
Technoelast FIX can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is installed using a special fi xture on a prepared base. Seams are sealed using a propane burner.
Material application: according to the Manual for Designing and Installation of Roofs with Mechanical Fastening Using Technoelast FIX and Technoelast SOLO Materials.
Storage
Store vertically, in a place protected from direct sunlight.
Waterproofing warranty — 10 years
Service life — 25-30 years
Specifications:
| Property | Technoelast FIX | |
| Thickness, mm (±0.1 mm) | 3,0 | |
| Mass of 1 m2, kg, (±0.25 kg) | 4,0 | |
| Longitudinal/transverse breaking load, N, not less than | polyester | 600/600 |
| Bend point on R=25 mm and R=10 mm beam, °C, no more than | -25 | |
| Heat endurance, °С, not less than | 100 | |
| polyester | 600/600 | |
| Crack resistance at the nail shank, N, not less than | 260 | |
| Protective covering type | on the top | film with logo |
| on the bottom | coarse-grained sand | |
| Length / width, m | 10х1 |