EN UA
Hot Line: 8 800 200 05 65


Products

CHNOROOF N30 KLIN

ТЕCHNOROOF N30 – KLIN

Application areas

The slabs are designed for the creation of a roof slope of 1.7% and 4.2% to allow for water removal from the roof to waste water gutters. For two-layer heat-insulation system, installation is carried out on the first (bottom) layer of the material.

Description of material

Nonflammable, waterproofing, heat- and sound insulating slabs, with a predefi ned slope of 1.7% and 4.2%, produced from basalt rock stonewool with a low-phenol binder.

Storage

The material must be stored in covered warehouses. Storage of slopes under a awning or outside of one is allowed subject to packing of the transport pallet with wedges in polyethylene film (in a package), protecting the wedges from atmospheric precipitation.



Types of material

    TECHNOROOF N30 KLIN (1.7%)

    TECHNOROOF N30 KLIN (4.2%)


Basic physical and mechanical properties

PropertyTECHNOROOF N30 KLIN (1.7%)TECHNOROOF N30 KLIN (4.2%)
Compression strength at 10% deformation, kPa, not less than30 30
Flammability gradeNG NG
Thermal conductivity, W/m*C 250,038 0,038
A0,041 0,041
B0,042 0,042
Humidity by weight, %, no more than0,5 0,5
Water absorption by volume, %, no more than1,5 1,5
Content of organic substances, %, no more than4,5 4,5
Density, kg/m3100-130 100-130
Length, mm 1200 1200
Width, mm 1200 600
Angle of slope, % 1,7 4,2
Thickness (min/max), mm Element A30/50 30/55
Element B50/70 55/80
Element C40/40 50/50