Application areas
Waterproofing of bridgeworks, ramps, floats and other structures.
Description of material
TECHNOELASTMOST S is a waterproofing material produced by placing a special binder on a superstrong base. The material has maximum indicators for wear resistance, durability and withstands high temperatures (up to +220°C).
TECHNOELASTMOST S is widely recognized as a reliable material for waterproofi ng installation at federal transport facilities.
TECHNOELASTMOST S is designed for installation of the protective and coupling layer on steel orthotropic reinforced concrete slabs for traffi c ways in case of asphalt concrete installation (up to +220°C) directly on waterproofing.
TECHNOELASTMOST can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).
Method of application
The material is welded on a prepared surface using a gas burner or special-purpose equipment. Material application: according to the Manual for Waterproofing of Bridgeworks by Roll-Fed Welded-On TECHNOELASTMOST Materials.
Storage
Store vertically, in a place protected from direct sunlight.
Thickness 5.2 mm
Waterproofing warranty — 10 years
Service life — more than 40 years
Specifications:
Property | TECHNOELASTMOST S | |
Thickness, mm (±0.1 mm) | 5,2 | |
Mass of 1 m2, kg, (±0.25 kg) | 5,8 | |
Longitudinal/transverse breaking load, N, not less than | polyester | 1000/900 |
Bend point on R=25 mm and R=10 mm beam, °C, no more than | -25 | |
Heat endurance, °С, not less than | 140 | |
Static puncture resistance, N, not less than | 250 | |
Protective covering type | on the top | sand |
on welded-on side | film with logo | |
Length / width, m | 8х1 |